Facilities
INSTALLATION OF WOOD-BURNING STOVES
WOOD FIREPLACE INSERT INSTALLATION – VERTICAL FLUE OUTLET
Flue gas evacuation system designed for wood-burning fireplace inserts with a direct vertical roof outlet, optimising natural draught and ensuring safe, reliable and efficient operation.
System Components
• SW/DW adapter (connection from the fireplace insert to the insulated double-wall flue)
• Straight vertical insulated double-wall (DW) pipe sections
• Locking bands supplied with all components
• Anti-downdraught terminal (DW)
FEATURES
• Direct vertical connection from the wood-burning fireplace insert, with no changes of direction
• Immediate transition to an insulated double-wall flue system, providing optimum thermal insulation from the outset
• Configuration designed to maximise natural draught and ensure efficient flue gas evacuation
• Modular system for fast, precise and secure installation
Key Benefits
• Maximum performance thanks to a straight vertical flue run with no elbows
• High level of thermal insulation throughout the entire flue system (DW)
• Durable system with excellent resistance to high temperatures
• Low maintenance and high efficiency
• Safe, consistent and reliable flue gas evacuation
WOOD STOVE INSTALLATION – TOP OUTLET – SW / EXOBLACK DW
Flue gas evacuation system designed for wood stoves with a top flue outlet, combining an internal single-wall (SW) flue with an external matte black insulated double-wall flue (EXOBLACK DW), ensuring optimum performance and a clean, stylish appearance.
System Components
• Anti-condensation starter module
• Straight enamelled single-wall pipe sections
• 90° enamelled elbow
• SW/DW adapter (single-wall → double-wall)
• Flat wall trim plate for wall penetration
• Double-wall elbow (DW)
• Straight vertical insulated double-wall (DW) pipe sections with locking bands
• Wall support bracket
• Anti-downdraught terminal (DW)
FEATURES
• Direct vertical flue gas evacuation from the top outlet of the wood stove
• The anti-condensation starter module helps reduce the formation of condensate and soot deposits
• Internal single-wall flue section promotes rapid evacuation of hot combustion gases
• Change of direction by means of an elbow for connection to the wall outlet
• Wall penetration fitted with a trim plate, ensuring both safety and a neat aesthetic finish
• Transition to an insulated double-wall flue for the external section, improving thermal insulation
• External vertical flue configuration optimises natural draught
• Wall support brackets provide structural stability and ensure correct alignment of the flue system
Key Benefits
• Improved performance thanks to a direct vertical flue path from the appliance
• High level of thermal insulation on the external flue section (DW)
• Clean and attractive installation, both indoors and outdoors
• Excellent resistance to high temperatures and demanding operating conditions
• Safe, efficient and long-lasting flue gas evacuation
WOOD STOVE INSTALLATION – TOP OUTLET – WALL EXIT CONFIGURATION
Flue gas evacuation system designed for wood stoves with a top flue outlet, featuring a wall exit configuration by means of a single-wall (SW) elbow and a double-wall insulated (DW) vertical flue. This configuration combines high performance, safety and adaptability to the building layout.
System Components
• Anti-condensation starter module
• Straight enamelled single-wall pipe sections
• 45° enamelled single-wall connecting elbow
• SW/DW adapter (single-wall → double-wall)
• 45° flat wall trim plate for wall penetration
• 135° double-wall tee with condensate collector (DW)
• Straight vertical insulated double-wall (DW) pipe sections with locking bands
• Screw-fixed wall support bracket (DW)
• Anti-downdraught terminal (DW)
FEATURES
• Vertical flue gas evacuation from the top outlet of the wood stove
• Initial single-wall section fitted with an anti-condensation starter module to reduce the build-up of soot and deposits
• Change of direction by means of an elbow towards the wall penetration
• Wall penetration fitted with a trim plate, providing both safety and a clean aesthetic finish
• Transition to an insulated double-wall flue system for the external section
• 135° tee with lower condensate collector, improving flue gas flow and reducing pressure losses while providing:
- condensate collection;
- easy access for inspection and cleaning.
• External vertical flue configuration optimises natural draught
• Wall support brackets ensure structural stability and secure support of the flue system
Key Benefits
• Versatile solution for wood stoves with a top outlet and wall exit configuration
• Reduced soot accumulation thanks to the 135° tee
• Excellent thermal insulation on the external flue section (DW)
• Clean and attractive installation at the wall penetration
• High resistance to corrosion and high temperatures
• Simple and easily accessible maintenance
• Safe, efficient and long-lasting flue gas evacuation
WOOD STOVE INSTALLATION – VERTICAL FLUE OUTLET
Flue gas evacuation system designed for wood stoves with a direct vertical roof outlet, optimising natural draught and ensuring the safe and efficient evacuation of combustion gases. This is the recommended installation for a roof outlet configuration.
System Components
• Anti-condensation starter module
• Straight enamelled single-wall pipe sections
• SW/DW adapter (single-wall → double-wall)
• Straight vertical insulated double-wall pipe sections with matte black finish (DW)
• Lead roof flashing (for roof pitches from 5° to 30°)
• Rain collar
• Anti-downdraught terminal (DW)
FEATURES
• Direct vertical flue gas evacuation from the top outlet of the wood stove
• Internal single-wall flue section fitted with an anti-condensation starter module to minimise the build-up of soot and deposits
• Transition to an insulated double-wall flue system before passing through the roof
• Roof penetration with lead flashing and rain collar, ensuring a watertight seal against water ingress
• Fully vertical flue configuration, maximising natural draught and overall system performance
Key Benefits
• Excellent natural draught and highly stable combustion
• Maximum thermal insulation on the external flue section (DW)
• Outstanding weatherproof sealing at the roof penetration
• Durable system with excellent resistance to high temperatures
• Safe, continuous and reliable flue gas evacuation
INSTALLATION OF PELLET STOVES
PELLET STOVE INSTALLATION – REAR OUTLET – DIRECT SW CONNECTION
Flue gas evacuation system designed for pellet stoves with a rear flue outlet, allowing a direct connection to the appliance by means of a single-wall (SW) horizontal section and a double-wall insulated (DW) vertical flue.
System Components
• Straight enamelled single-wall connecting pipe
• SW/DW adapter (single-wall → double-wall)
• 90° tee with condensate collector (DW)
• Straight vertical insulated double-wall (DW) pipe sections with locking bands
• Wall support bracket (DW)
• Anti-downdraught terminal (DW)
FEATURES
• Modular system for fast and secure installation
• 90° tee with condensate collector providing:
- condensate collection;
- access for cleaning and maintenance.
• Wall support brackets ensuring excellent structural stability
• Designed to facilitate routine maintenance operations
Key Benefits
• Flexible installation
• Robust and durable system
• Low maintenance
• High thermal efficiency
PELLET STOVE INSTALLATION – REAR OUTLET – 90° SW TEE CONNECTION
Flue gas evacuation system designed for pellet stoves with a rear flue outlet, featuring an internal connection using a 90° single-wall (SW) tee and a double-wall insulated (DW) vertical flue.
System Components
• Straight enamelled single-wall pipe (vertical section from the stove) connected to a 90° tee with condensate collector
• 45° enamelled elbow for connection to the rear outlet
• SW/DW adapter (single-wall → double-wall)
• 45° flat wall trim plate for wall penetration (DW)
• 135° tee with condensate collector (DW)
• Straight vertical insulated double-wall (DW) pipe sections with locking bands
• Wall support bracket (DW)
• Anti-downdraught terminal (DW)
FEATURES
• Flue gas evacuation through a direct connection to the rear outlet of the pellet stove
• Initial vertical section in single-wall flue pipe
• Change of direction by means of a 45° elbow for connection to the external flue system
• Wall penetration fitted with a trim plate for a clean and secure finish
• Transition to a double-wall insulated flue for the external section
• 135° tee with lower condensate collector, improving flue gas flow and reducing pressure losses while providing:
- condensate collection;
- easy access for inspection and cleaning.
• Wall support brackets ensuring structural stability and secure installation
• Vertical configuration promoting natural draught and optimum appliance performance
Key Benefits
• Clean and attractive installation thanks to the wall trim plate
• Simple and easily accessible maintenance
• Modular system adaptable to a wide range of installation layouts
• High corrosion resistance
• Withstands temperatures up to 200°C with silicone gasket
• Safe, efficient and long-lasting flue gas evacuation
Visualización del montaje